Difference between revisions of "AMOD AGL3080"

From Dietrich Blog (Strato)
Jump to: navigation, search
(→‎Log-File)
(→‎Log-File)
Line 90: Line 90:
 
$GPRMC,180331.000,A,5334.2911,N,00958.2541,E,0.00,193.68,290709,,,A*6A
 
$GPRMC,180331.000,A,5334.2911,N,00958.2541,E,0.00,193.68,290709,,,A*6A
 
$GPVTG,193.68,T,,M,0.00,N,0.0,K,A*08
 
$GPVTG,193.68,T,,M,0.00,N,0.0,K,A*08
 +
</pre>
 +
 +
Und so sieht ein Log-File im Modus=5 aus d.h. alle 10 sec volles Logging:
 +
<pre>
 +
$ADVER,3080,2.2
 +
$GPRMC,094937.000,A,5334.2531,N,00958.1835,E,0.00,153.30,300709,,,A*68
 +
$GPGGA,094947.000,5334.2531,N,00958.1835,E,1,03,2.1,171.2,M,46.0,M,,0000*53
 +
$GPGSA,A,2,10,15,28,,,,,,,,,,2.3,2.1,1.0*3F
 +
$GPGSV,3,1,12,15,62,288,27,28,59,108,22,10,30,197,27,27,28,256,17*70
 +
$GPGSV,3,2,12,08,43,069,18,18,12,323,,19,10,025,,21,08,295,*71
 +
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
 +
$GPRMC,094947.000,A,5334.2531,N,00958.1835,E,0.00,153.30,300709,,,A*6F
 +
$GPVTG,153.30,T,,M,0.00,N,0.0,K,A*09
 +
$GPGGA,094957.000,5334.2605,N,00958.1983,E,1,04,4.0,143.2,M,46.0,M,,0000*5B
 +
$GPGSA,A,3,10,15,27,28,,,,,,,,,8.6,4.0,7.6*33
 +
$GPGSV,3,1,12,15,62,288,27,28,59,108,16,10,30,197,26,27,28,256,17*76
 +
$GPGSV,3,2,12,08,43,069,18,18,12,323,,19,10,025,,21,08,295,*71
 +
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
 +
$GPRMC,094957.000,A,5334.2605,N,00958.1983,E,1.04,75.13,300709,,,A*57
 +
$GPVTG,75.13,T,,M,1.04,N,1.9,K,A*30
 +
$GPGGA,095007.000,5334.2607,N,00958.1997,E,1,04,4.0,143.2,M,46.0,M,,0000*51
 +
$GPGSA,A,3,10,15,27,28,,,,,,,,,8.6,4.0,7.6*33
 +
$GPGSV,3,1,12,15,62,288,27,28,59,108,13,10,30,197,28,27,28,256,19*73
 +
$GPGSV,3,2,12,08,43,069,15,18,12,323,,19,10,025,,21,08,295,*7C
 +
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
 +
$GPRMC,095007.000,A,5334.2607,N,00958.1997,E,0.00,75.13,300709,,,A*58
 +
$GPGGA,095017.000,5334.2655,N,00958.2266,E,1,03,2.1,132.1,M,46.0,M,,0000*54
 +
$GPGSA,A,2,10,15,28,,,,,,,,,,2.3,2.1,1.0*3F
 +
$GPGSV,3,1,12,15,62,287,28,28,59,107,20,08,43,069,13,10,29,197,27*7F
 +
$GPGSV,3,2,12,27,29,256,,18,13,323,,19,09,024,,09,08,255,*79
 +
$GPGSV,3,3,12,21,08,294,,07,05,073,,17,02,133,,24,02,258,*76
 +
$GPRMC,095017.000,A,5334.2655,N,00958.2266,E,5.15,80.38,300709,,,A*5A
 +
$GPVTG,80.38,T,,M,5.15,N,9.5,K,N*3C
 +
$GPGGA,095027.000,5334.2654,N,00958.2239,E,1,03,3.1,130.9,M,46.0,M,,0000*57
 
</pre>
 
</pre>
  

Revision as of 11:11, 30 July 2009

Hintergrund

Für einen Urlaub in Afrika habe ich mit eine neue Kamera zugelegt und will auch in das Thema Geo-Logging / Geo-Tagging (GPS) einsteigen. Als GPS-Logger habe ich mich nach langen Überlegungen für den AMOD AGL3080 entschieden.

Bestellt am 28.7.2009 um 12:12 Uhr im Onlineshop http://www.gps-haus.de, traf das kleine Wunderding bereits am nächsten Tag gegen 13:30 Uhr per Normal-DHL bei mir in Hamburg ein.

Der AMOD GPS Photo Tracker AGL3080

Hauptgründe:

  • Pro
    • Driverless d.h. das Gerät fungiert als USB-Stick (USB Flash Disk). Es kann über USB mit einem Computer (WindowsXP, Mac, Linux und auch mit meinem Windows CE 5.0 COWON Q5W) verbunden werden, die NMEA-Log-Dateien werden manuell vom "Stick" (AGL3080 auch ohne Power on) auf den Computer kopiert (ohne proprietäre Spezial-Software. Da sind die Logger-Daten erst einmal sicher aufgehoben und können später mit Standard-Software wie JetPhoto, GPSVisualizer etc. weiterbearbeitet werden...
    • Großer interner Speicher (128 MB)
    • Push to Log
    • Logging-Intervall einstellbar am Gerät durch Drücken von Tasten (also ohne Computer)
    • Lange Betriebszeit (15 Stunden gibt der Hersteller an)
  • Cons
    • Aufladen der Akkus nicht im Gerät über miniUSB, sondern nur mit extermen (zusätzlichen) Ladegerät
    • kein Bluetooth
    • keine Navigationsfunktion ("nur" Logger)

Erfahrungen

Satelliten Fixing

Bevor man loslegt, muss man unbedingt das sog. "Fixing" gemacht haben. Dafür muss man etwas Zeit einkalkulieren, bevor man sich bewegt!!!

  • Wenn die mittlere LED (Satelliten-Symbol) dauernd leuchtet, ist noch kein Empfang
  • Wenn die mittlere LED (Satelliten-Symbol) blinkt, ist es geschafft und das Logging läuft.

Innerhalb meiner Wohnung bekomme ich keinen Empfang - auch nicht am Fenster....

Batterien / Akkus

Zusatzanschaffung: NiMH Akkus vom Typ "AAA" und ein gutes Ladegerät

  • Ladegerät: ANSMANN DIGISPEED 4
    • Ladestrom Micro AAA NiMH: 750 mA
    • Ladestrom Mignon AA NiMH: 1750 mA
  • Akkus:
    • Micro AAA von Ansmann NiMH 1100 mAh (schnell-ladefähig) ---> Ladezeit ca. 1 h 30 m
    • Mignon AA von Ansmann NiMH 2850 mAh ---> Ladezeit ca. 1 h 40 m

Setup-Modus

  • Setup Modus beginnen
    • Power OFF
    • Knöpfe "Power" und "Mark" gleichzeitig drücken und festhalten
    • Mitzählen, wie die LEDs fünf Mal blinken und dann Dauerlicht erscheint
    • Nun die beiden Knöpfe loslassen
    • Setup-Modus ist erreicht (wird nach einer Minute abgeschaltet, wenn man nicht tut...)
  • Logging Mode Setup
    • Knopf "Mark" 1x = Modus 1
    • Knopf "Mark" 2x = Modus 2
    • ..
  • Setup speichern
    • Knopf "Power" 5+ Sekunden drücken
    • das Setup wird gespeichert ("registered")
    • das Gerät wird ausgeschaltet

Firmware

Source: http://www.flickr.com/groups/amod-agl3080/discuss/72157606990159645/

AFAIK, you can't check which firmware version your unit has. Just install the new one overwriting the old one.

Yes you can check. With v2.2, when you press & hold the ON button to power it up, first all the LEDs light up, then immediately when they turn off the top red "file access" LED will light 2 or 3 times (the first flash is immediate to pay attention).

  • 2 flashes = SN ON (the default software)
  • 3 flashes = SN OFF

Unfortunately the log file only says "2.2" and they didn't change the version for SN OFF so both versions tag the log file the same.

Cheers, Patrick

Log-File

Beispiel eines Log-Files im Log-Modus 1 d.h. jede Sekunde volles Logging. In der ersten Zeile dieses Log-Files im NMEA-Format sieht man die Firmware-Version, hier: v2.2 

$ADVER,3080,2.2
$GPRMC,180327.066,A,5334.2867,N,00958.2369,E,0.71,186.36,290709,,,A*68
$GPGGA,180328.067,5334.2843,N,00958.2396,E,1,04,3.0,92.6,M,46.0,M,,0000*63
$GPGSA,A,3,24,29,16,30,,,,,,,,,3.2,3.0,1.0*38
$GPRMC,180328.067,A,5334.2843,N,00958.2396,E,1.43,198.12,290709,,,A*69
$GPVTG,198.12,T,,M,1.43,N,2.7,K,A*0D
$GPGGA,180329.066,5334.2903,N,00958.2470,E,1,04,3.0,73.7,M,46.0,M,,0000*67
$GPGSA,A,3,24,29,16,30,,,,,,,,,3.2,3.0,1.0*38
$GPRMC,180329.066,A,5334.2903,N,00958.2470,E,1.04,193.68,290709,,,A*66
$GPVTG,193.68,T,,M,1.04,N,1.9,K,A*05
$GPGGA,180330.000,5334.2911,N,00958.2541,E,1,04,3.0,47.2,M,46.0,M,,0000*6D
$GPGSA,A,3,24,29,16,30,,,,,,,,,3.2,3.0,1.0*38
$GPRMC,180330.000,A,5334.2911,N,00958.2541,E,0.00,193.68,290709,,,A*6B
$GPVTG,193.68,T,,M,0.00,N,0.0,K,A*08
$GPGGA,180331.000,5334.2911,N,00958.2541,E,1,04,3.0,47.2,M,46.0,M,,0000*6C
$GPGSA,A,3,24,29,16,30,,,,,,,,,3.2,3.0,1.0*38
$GPGSV,3,1,10,29,64,074,41,24,58,098,42,16,37,297,38,30,24,130,18*73
$GPGSV,3,2,10,21,47,171,,31,42,228,,10,19,060,,23,09,310,22*77
$GPGSV,3,3,10,13,08,345,,06,04,257,*72
$GPRMC,180331.000,A,5334.2911,N,00958.2541,E,0.00,193.68,290709,,,A*6A
$GPVTG,193.68,T,,M,0.00,N,0.0,K,A*08

Und so sieht ein Log-File im Modus=5 aus d.h. alle 10 sec volles Logging: 

$ADVER,3080,2.2
$GPRMC,094937.000,A,5334.2531,N,00958.1835,E,0.00,153.30,300709,,,A*68
$GPGGA,094947.000,5334.2531,N,00958.1835,E,1,03,2.1,171.2,M,46.0,M,,0000*53
$GPGSA,A,2,10,15,28,,,,,,,,,,2.3,2.1,1.0*3F
$GPGSV,3,1,12,15,62,288,27,28,59,108,22,10,30,197,27,27,28,256,17*70
$GPGSV,3,2,12,08,43,069,18,18,12,323,,19,10,025,,21,08,295,*71
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
$GPRMC,094947.000,A,5334.2531,N,00958.1835,E,0.00,153.30,300709,,,A*6F
$GPVTG,153.30,T,,M,0.00,N,0.0,K,A*09
$GPGGA,094957.000,5334.2605,N,00958.1983,E,1,04,4.0,143.2,M,46.0,M,,0000*5B
$GPGSA,A,3,10,15,27,28,,,,,,,,,8.6,4.0,7.6*33
$GPGSV,3,1,12,15,62,288,27,28,59,108,16,10,30,197,26,27,28,256,17*76
$GPGSV,3,2,12,08,43,069,18,18,12,323,,19,10,025,,21,08,295,*71
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
$GPRMC,094957.000,A,5334.2605,N,00958.1983,E,1.04,75.13,300709,,,A*57
$GPVTG,75.13,T,,M,1.04,N,1.9,K,A*30
$GPGGA,095007.000,5334.2607,N,00958.1997,E,1,04,4.0,143.2,M,46.0,M,,0000*51
$GPGSA,A,3,10,15,27,28,,,,,,,,,8.6,4.0,7.6*33
$GPGSV,3,1,12,15,62,288,27,28,59,108,13,10,30,197,28,27,28,256,19*73
$GPGSV,3,2,12,08,43,069,15,18,12,323,,19,10,025,,21,08,295,*7C
$GPGSV,3,3,12,09,08,254,,07,06,072,,24,02,258,,17,02,133,*72
$GPRMC,095007.000,A,5334.2607,N,00958.1997,E,0.00,75.13,300709,,,A*58
$GPGGA,095017.000,5334.2655,N,00958.2266,E,1,03,2.1,132.1,M,46.0,M,,0000*54
$GPGSA,A,2,10,15,28,,,,,,,,,,2.3,2.1,1.0*3F
$GPGSV,3,1,12,15,62,287,28,28,59,107,20,08,43,069,13,10,29,197,27*7F
$GPGSV,3,2,12,27,29,256,,18,13,323,,19,09,024,,09,08,255,*79
$GPGSV,3,3,12,21,08,294,,07,05,073,,17,02,133,,24,02,258,*76
$GPRMC,095017.000,A,5334.2655,N,00958.2266,E,5.15,80.38,300709,,,A*5A
$GPVTG,80.38,T,,M,5.15,N,9.5,K,N*3C
$GPGGA,095027.000,5334.2654,N,00958.2239,E,1,03,3.1,130.9,M,46.0,M,,0000*57

Blog

Source: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=98383&whichpage=8

Posted - 03/12/2008 : 01:49:23 Show Profile Visit gpspassion's Homepage Reply with Quote UPDATE ON SN : Looks like the new firmware I was told about is available here : http://www.amod.com.tw/Support/support.htm - it's called "Firmware upgrade for AMOD GPS Photo Tracker for SN off"

Downloaded and installed without a hitch !

The release notes also mention a new "SETUP MODE" with 6 logging modes with update rates of 1/5/10 seconds. One thing they don't say is that once you have set the mode you want you have to press the power button for 5+ seconds to get back to register the setting and turn off the device.

In Mode 6 (RMC 10 seconds) you can log for a hefty 2880 hours or 120 days !

-- Dkracht 09:19, 30 July 2009 (CEST)

Retrieved from "http://wiki.kr8.de/index.php?title=AMOD_AGL3080&oldid=7066"