Difference between revisions of "AMOD AGL3080"

From Dietrich Blog (Strato)
Jump to: navigation, search
(Blog)
(= Firmware)
Line 44: Line 44:
 
=== Firmware ==
 
=== Firmware ==
 
Source: http://www.flickr.com/groups/amod-agl3080/discuss/72157606990159645/
 
Source: http://www.flickr.com/groups/amod-agl3080/discuss/72157606990159645/
 +
 
AFAIK, you can't check which firmware version your unit has. Just install the new one overwriting the old one.  
 
AFAIK, you can't check which firmware version your unit has. Just install the new one overwriting the old one.  
  
 
Yes you can check. With v2.2, when you press & hold the ON button to power it up, first all the LEDs light up, then immediately when they turn off the top red "file access" LED will light 2 or 3 times (the first flash is immediate to pay attention).
 
Yes you can check. With v2.2, when you press & hold the ON button to power it up, first all the LEDs light up, then immediately when they turn off the top red "file access" LED will light 2 or 3 times (the first flash is immediate to pay attention).
 
+
* 2 flashes = SN ON (the default software)
2 flashes = SN ON (the default software)
+
* 3 flashes = SN OFF
3 flashes = SN OFF
 
  
 
Unfortunately the log file only says "2.2" and they didn't change the version for SN OFF so both versions tag the log file the same.
 
Unfortunately the log file only says "2.2" and they didn't change the version for SN OFF so both versions tag the log file the same.

Revision as of 10:45, 30 July 2009

Hintergrund

Für einen Urlaub in Afrika habe ich mit eine neue Kamera zugelegt und will auch in das Thema Geo-Logging / Geo-Tagging (GPS) einsteigen. Als GPS-Logger habe ich mich nach langen Überlegungen für den AMOD AGL3080 entschieden.

Bestellt am 28.7.2009 um 12:12 Uhr im Onlineshop http://www.gps-haus.de, traf das kleine Wunderding bereits am nächsten Tag gegen 13:30 Uhr per Normal-DHL bei mir in Hamburg ein.

Der AMOD GPS Photo Tracker AGL3080

Hauptgründe:

  • Pro
    • Driverless d.h. das Gerät fungiert als USB-Stick (USB Flash Disk). Es kann über USB mit einem Computer (WindowsXP, Mac, Linux und auch mit meinem Windows CE 5.0 COWON Q5W) verbunden werden, die NMEA-Log-Dateien werden manuell vom "Stick" (AGL3080 auch ohne Power on) auf den Computer kopiert (ohne proprietäre Spezial-Software. Da sind die Logger-Daten erst einmal sicher aufgehoben und können später mit Standard-Software wie JetPhoto, GPSVisualizer etc. weiterbearbeitet werden...
    • Großer interner Speicher (128 MB)
    • Push to Log
    • Logging-Intervall einstellbar am Gerät durch Drücken von Tasten (also ohne Computer)
    • Lange Betriebszeit (15 Stunden gibt der Hersteller an)
  • Cons
    • Aufladen der Akkus nicht im Gerät über miniUSB, sondern nur mit extermen (zusätzlichen) Ladegerät
    • kein Bluetooth
    • keine Navigationsfunktion ("nur" Logger)

Erfahrungen

Satellieten Fixing

Bevor man loslegt, muss man unbedingt das sog. "Fixing" gemacht haben.

  • Wenn die mittlere LED (Satelliten-Symbol) dauernd leuchtet, ist kein Empfang
  • Wenn die mittlere LED (Satelliten-Symbol) blinkt, ist es geschafft und das Logging läuft.

Innerhalb meiner Wohnung bekomme ich keinen Empfang - auch nicht am Fenster....

Batterien / Akkus

Zusatzanschaffung: NiMH Akkus vom Typ "AAA" und ein gutes Ladegerät

  • Ladegerät: ANSMANN DIGISPEED 4
    • Ladestrom Micro AAA NiMH: 750 mA
    • Ladestrom Mignon AA NiMH: 1750 mA
  • Akkus:
    • Micro AAA von Ansmann NiMH 1100 mAh (schnell-ladefähig) ---> Ladezeit ca. 1 h 30 m
    • Mignon AA von Ansmann NiMH 2850 mAh ---> Ladezeit ca. 1 h 40 m

Setup-Modus

  • Setup Modus beginnen
    • Power OFF
    • Knöpfe "Power" und "Mark" gleichzeitig drücken und festhalten
    • Mitzählen, wie die LEDs fünf Mal blinken und dann Dauerlicht erscheint
    • Nun die beiden Knöpfe loslassen
    • Setup-Modus ist erreicht (wird nach einer Minute abgeschaltet, wenn man nicht tut...)

= Firmware

Source: http://www.flickr.com/groups/amod-agl3080/discuss/72157606990159645/

AFAIK, you can't check which firmware version your unit has. Just install the new one overwriting the old one.

Yes you can check. With v2.2, when you press & hold the ON button to power it up, first all the LEDs light up, then immediately when they turn off the top red "file access" LED will light 2 or 3 times (the first flash is immediate to pay attention).

  • 2 flashes = SN ON (the default software)
  • 3 flashes = SN OFF

Unfortunately the log file only says "2.2" and they didn't change the version for SN OFF so both versions tag the log file the same.

Cheers, Patrick

Blog

Source: http://www.gpspassion.com/forumsen/topic.asp?TOPIC_ID=98383&whichpage=8

Posted - 03/12/2008 : 01:49:23 Show Profile Visit gpspassion's Homepage Reply with Quote UPDATE ON SN : Looks like the new firmware I was told about is available here : http://www.amod.com.tw/Support/support.htm - it's called "Firmware upgrade for AMOD GPS Photo Tracker for SN off"

Downloaded and installed without a hitch !

The release notes also mention a new "SETUP MODE" with 6 logging modes with update rates of 1/5/10 seconds. One thing they don't say is that once you have set the mode you want you have to press the power button for 5+ seconds to get back to register the setting and turn off the device.

In Mode 6 (RMC 10 seconds) you can log for a hefty 2880 hours or 120 days !

-- Dkracht 09:19, 30 July 2009 (CEST)