Difference between revisions of "D-Link DWL 2100AP"
From Dietrich Blog (Strato)
m (D-Link 2100AP moved to D-Link DWL 2100AP) |
|||
| Line 3: | Line 3: | ||
Siehe auch: [[Hardware]], [[WLAN]] | Siehe auch: [[Hardware]], [[WLAN]] | ||
| − | * Hersteller: D-Link | + | == Wireless Access Point == |
| + | * Hersteller/Type: D-Link DWL-2100AP | ||
| + | * Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point | ||
| + | * Sendeleistung: 15 dBm (15->32mW, 17->50mW, 20->100mW) | ||
| + | * WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater | ||
| + | * Firmware v1.01en --> v2.10eu rev 338 (18.06.2005) | ||
| + | * MAC: 00:11:95:D5:51:02 | ||
| + | * Ethernet-Kabel-Verbindung zum Switch/Router | ||
| + | * Channel: 7 (22442 MHz) | ||
| + | * Security Level: WEP | ||
| + | ** WEP Encryption: 128 Bit | ||
| + | ** First Key: 6275...32 | ||
| + | * Factory Reset IP-Adresse: 192.168.0.50 | ||
| + | * Feste IP-Adresse: 192.168.1.3 | ||
| + | * Default Gateway: 192.168.1.2 (WLAN Router/Switch) | ||
| + | * Wireless Modus = "Access Point" (war auf: "Client") | ||
| + | * Antenne: D-Link DWL-M60AT (Gain 6 dBi - directional indoor antenna - 1,5 m Kabel) (besser: DWL-R60AT ohne Kabel) | ||
| + | * Security: 128-Bit WEP | ||
| + | * 802.11g only = Disabled (enabled would be faster) | ||
| + | * Super G Mode: Super G with dynamic Turbo (Super G = Compression, Turbo = multiple channels, Dynamic = downward compatible) | ||
| + | * telnet: set antenna 1 (was: best) | ||
| + | |||
| + | == Wireless Repeater == | ||
| + | * Hersteller/Type: D-Link DWL-2100AP | ||
| + | * Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point | ||
| + | * WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater | ||
| + | * Firmware v1.01en --> v2.10eu rev 338 (18.06.2005) | ||
| + | * MAC: 00:11:95:D5:4F:D8 | ||
| + | * Ethernet-Kabel-Verbindung: ./. | ||
| + | * Factory Reset IP-Adresse: 192.168.0.50 | ||
| + | * Feste IP-Adresse: LAN 192.168.1.4 | ||
| + | * Channel: (nimmt automatisch den vom Access Point) | ||
| + | * Antenne: WLA-5dBi - omnidiretional (19.05.2004) | ||
| + | * Security: 128-Bit WEP | ||
| + | * 802.11g only = Disabled (enabled would be faster) | ||
| + | * Super G Mode: Super G with dynamic Turbo | ||
| + | * telnet: set antenna 1 (was: best) | ||
Revision as of 10:52, 24 November 2007
Incomplete, needs to be expanded. Please help to fill the gaps or discuss the issue on the talk page
Wireless Access Point
- Hersteller/Type: D-Link DWL-2100AP
- Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
- Sendeleistung: 15 dBm (15->32mW, 17->50mW, 20->100mW)
- WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
- Firmware v1.01en --> v2.10eu rev 338 (18.06.2005)
- MAC: 00:11:95:D5:51:02
- Ethernet-Kabel-Verbindung zum Switch/Router
- Channel: 7 (22442 MHz)
- Security Level: WEP
- WEP Encryption: 128 Bit
- First Key: 6275...32
- Factory Reset IP-Adresse: 192.168.0.50
- Feste IP-Adresse: 192.168.1.3
- Default Gateway: 192.168.1.2 (WLAN Router/Switch)
- Wireless Modus = "Access Point" (war auf: "Client")
- Antenne: D-Link DWL-M60AT (Gain 6 dBi - directional indoor antenna - 1,5 m Kabel) (besser: DWL-R60AT ohne Kabel)
- Security: 128-Bit WEP
- 802.11g only = Disabled (enabled would be faster)
- Super G Mode: Super G with dynamic Turbo (Super G = Compression, Turbo = multiple channels, Dynamic = downward compatible)
- telnet: set antenna 1 (was: best)
Wireless Repeater
- Hersteller/Type: D-Link DWL-2100AP
- Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
- WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
- Firmware v1.01en --> v2.10eu rev 338 (18.06.2005)
- MAC: 00:11:95:D5:4F:D8
- Ethernet-Kabel-Verbindung: ./.
- Factory Reset IP-Adresse: 192.168.0.50
- Feste IP-Adresse: LAN 192.168.1.4
- Channel: (nimmt automatisch den vom Access Point)
- Antenne: WLA-5dBi - omnidiretional (19.05.2004)
- Security: 128-Bit WEP
- 802.11g only = Disabled (enabled would be faster)
- Super G Mode: Super G with dynamic Turbo
- telnet: set antenna 1 (was: best)
