D-Link DWL 2100AP

Incomplete, needs to be expanded. Please help to fill the gaps or discuss the issue on the talk page

Siehe auch: Hardware, WLAN, Powerline

Ein Wireless Access Point von D-Link.

Wireless Access Point

• Hersteller/Type: D-Link DWL-2100AP
• Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
• Sendeleistung: 15 dBm (15->32mW, 17->50mW, 20->100mW)
• WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
• Firmware v1.01en --> v2.10eu rev 338 (18.06.2005)
• MAC: 00:11:95:D5:51:02
• Ethernet-Kabel-Verbindung zum Switch/Router
• Channel: 7 (22442 MHz)
• Security Level: WEP
  • WEP Encryption: 128 Bit
  • First Key: 6275...32
• Factory Reset IP-Adresse: 192.168.0.50
• Feste IP-Adresse: 192.168.1.3
• Default Gateway: 192.168.1.2 (WLAN Router/Switch)
• Wireless Modus = "Access Point" (war auf: "Client")
• Antenne: D-Link DWL-M60AT (Gain 6 dBi - directional indoor antenna - 1,5 m Kabel) (besser: DWL-R60AT ohne Kabel)
• Security: 128-Bit WEP
• 802.11g only = Disabled (enabled would be faster)
• Super G Mode: Super G with dynamic Turbo (Super G = Compression, Turbo = multiple channels, Dynamic = downward compatible)
• telnet: set antenna 1 (was: best)

Konfiguration 2100AP

Das Notebook, mit dem man den 2100AP konfigurieren will, muss eine bestimmte IP-ADresse haben .....

Wireless Repeater

• Hersteller/Type: D-Link DWL-2100AP
• Bezeichnung: D-Link AirPlus XtremeG 802.11g/108Mbps Wireless Access Point
• WDS: AP Client, PtP Bridge, PtMP Bridge, Repeater
• Firmware v1.01en --> v2.10eu rev 338 (18.06.2005)
• MAC: 00:11:95:D5:4F:D8
• Ethernet-Kabel-Verbindung: ./.
• Factory Reset IP-Adresse: 192.168.0.50
• Feste IP-Adresse: LAN 192.168.1.4
• Channel: (nimmt automatisch den vom Access Point)
• Antenne: WLA-5dBi - omnidiretional (19.05.2004)
• Security: 128-Bit WEP
• 802.11g only = Disabled (enabled would be faster)
• Super G Mode: Super G with dynamic Turbo
• telnet: set antenna 1 (was: best)

-- Dkracht 22:02, 9 February 2008 (CET)